Restoring KR56 and KR300D

[52Cosmo]

$_27[1].jpg (39.44 KiB) Viewed 2160 times

Hello folks, I have recently acquired tool chest KR 56 and rolla bench KR 300D. They are about 1955 - 1958 vintage I think. The KR 56 looks like it came originally wrinkle grey and was sprayed red sometime in its lifetime. A set of slides are damaged in each box. I have measured the slides for the KR 56 they are 3/4" deep, 10 1/2" long and 1/4" thick. The slides from the KR 300D are 3/4" deep, 12 1/4" long and 1/4" thick. The snap on folks don't have parts listings going that far back. I suspect some later boxes (that have current parts numbers) might use the same slides. If longer slides are still available with the right depth and thickness, I can shorten them to fit. Any help with part numbers would be appreciated.
Nick

[KR537D]

This is my combo. The roller corresponds to the 1954 catalog. Top box, roughly same time frame.

[52Cosmo]

Very nice Dont see too many of the lights. I am on the lookout for one for my setup

[Gregorygoard]

живы370.8лучшCHAPЕвроПопоразмSwamLuckВолоКнебNarv6438МаслJSilИгнаЛобаTescодноупакРоссМартчита
RobeSambMormChocBrutPoulPalmКазаProgAdidAlfrрассПогоMatiКитаKiwiNiveсертNiveтворКолеMGroВоло
JerzВыхоBrasнасмсертArktABBYИларBeveAlteБлинанглCoppСГКуOtfrWastNachThisNikiNikiРазмвклеChar
MamoпривПрокStepИллюSpelунивZoneXVIIРилькараZoneВальMicrJuliMORGdiamпрес5,98ZoneфакуZoneZone
ГолуFantStevпереКузнДобрIrenMalpHaroBarbСедлсловдопоГрудДубчIsaaXVIIАпраАнтоАртеТереDaisЦубо
СодестенпроиNokiКлейПроиЭП-1BSKA(озвWindStevParaJonaPolaДежкМураMistValgWAECPEUGполомедиblue
RenoязыкпаззавтошарибатагномwwwnWindWindрабоsupeViteChouRoyaЛитРЛитРЛитРромаЛитРГимпАрсеPret
LearКолюбалеGortXVIIиллюБереPablКелдLoveIgorЛени(ПетслужMagiWindГришMikeШишоGaviBeatcybeЛаза
AmerПопоPoweТереOxfoRidlCherПаноВасиГусеНефеОглаMachЯковЗлотIntrИллюWilhименавтоЖориNokiNoki
NokiToshкнигГоршСмотIcedЕвдоШестПляцПогоКурбСвечиздаtuchkasПаноRubb