Snap on 36-F Front Bearing Socket for Model T Fords
Posted: Mon Jun 17, 2013 1:57 pm
I have found several types of the 36-F socket, there are probably more, so if you have a different one please post a picture. All are 1/2 drive.
From left to right:
A early strike over, not marked 36F but stamped 1-1/8, which is the inside width. This could be just a error, so maybe someone else will have one. Height 1-3/4.
Another strike over, but marked 36-F, same height.
No date code, marked 36-F, height 2-9/16.
These were, according the "Snap on Story" were the first specialty sockets. They are shown in the 23 cat, and are last shown in the 28 cat.
From left to right:
A early strike over, not marked 36F but stamped 1-1/8, which is the inside width. This could be just a error, so maybe someone else will have one. Height 1-3/4.
Another strike over, but marked 36-F, same height.
No date code, marked 36-F, height 2-9/16.
These were, according the "Snap on Story" were the first specialty sockets. They are shown in the 23 cat, and are last shown in the 28 cat.
