Early two pinched brace.
Posted: Mon Feb 06, 2012 9:42 am
CollectingSnapOn.com
A website for collectors of Snap-On and Blue-Point Tools
http://collectingsnapon.com/forum/
Early two pinched brace.
Page 1 of 1
Re: Early two pinched brace.
Posted: Tue Feb 07, 2012 5:28 am
What year do you think this was manufactured? Was it before the four pinched brace? The 1925 catalog notes that the brace had ball stops, so the pinched stops must have been prior to 1925.
Re: Early two pinched brace.
Posted: Tue Feb 07, 2012 6:18 am
Its 20-21. Before four pinched. Four pinched were 21-22. Three ball starts in 22
Re: Early two pinched brace.
Posted: Wed Feb 08, 2012 2:31 pm
Here is a two pinched S-5 Sliding Tee with a 1/2 inch diameter bar. Are these rare since the early production S-5s had a 9/16 inch diameter bar?
- S-5 Sliding Tee 1/2" diameter bar
- S-5 Sliding Tee half inch bar.JPG (130.9 KiB) Viewed 1206 times
- S-5 Sliding Tee 2 pinch
- S-5 Sliding Tee 2 pinch.JPG (91.71 KiB) Viewed 1206 times
Re: Early two pinched brace.
Posted: Wed Feb 08, 2012 6:09 pm
A nice tee, the ones with the pinched ends are hard to find. there is a 9/32 and a 5/8 with pinched ends too.