Snap-On-Branded Gas Pump Display Case
This Snap-On-branded display case is constructed in the style of a Wayne Model 60 gas pump. Details include an illuminated Snap-On-branded globe, a lockable glass door, glass shelves, a mirrored interior, and a decorative register, hose, and nozzle. Decals and placards are also affixed to the piece, which measures approximately 47″ tall by 11″ wide and 8″ deep. This gas pump-style display case is now offered at no reserve in West Hartford, Connecticut.
The piece is finished in red and adorned with Snap-On and Ethyl Gasoline Corporation decals, lead content placards, and a decorative register, hose, and nozzle. The case measures approximately 47″ tall by 11″ wide and 8″ deep. Here is a recent sale
https://bringatrailer.com/listing/snap- ... nts-anchor
Location, San Marcos California 92069
Snap-On-Branded Gas Pump Display Case for sale
Forum rules
The owner of this board assumes no responsibility for the actions of people wishing to buy or sell items, it is merely for provided as an informational service. Use caution as you would with CraigsList.
Please make sure you've read the Rules and Etiquette Page, which spells out the rules and guidelines of this forum.
The owner of this board assumes no responsibility for the actions of people wishing to buy or sell items, it is merely for provided as an informational service. Use caution as you would with CraigsList.
Please make sure you've read the Rules and Etiquette Page, which spells out the rules and guidelines of this forum.
-
- Site Admin
- Posts: 240
- Joined: Wed Oct 13, 2010 6:34 pm
- Your Location: San Diego
- Contact:
Snap-On-Branded Gas Pump Display Case for sale
- Attachments
-
- It lights
- Snap-On-Branded Gas Pump Display Case (8).JPG (197.41 KiB) Viewed 10657 times
-
- Lights are on
- Snap-On-Branded Gas Pump Display Case (7).JPG (151.58 KiB) Viewed 10657 times
-
- Lights turned on
- Snap-On-Branded Gas Pump Display Case (6).JPG (169.29 KiB) Viewed 10657 times
-
- side
- Snap-On-Branded Gas Pump Display Case (5).JPG (173.82 KiB) Viewed 10657 times
-
- other side
- Snap-On-Branded Gas Pump Display Case (4).JPG (158.35 KiB) Viewed 10657 times
-
- display cabinet
- Snap-On-Branded Gas Pump Display Case (3).JPG (164.27 KiB) Viewed 10657 times
-
- On Off Switch
- Snap-On-Branded Gas Pump Display Case (1).JPG (117.24 KiB) Viewed 10657 times
-
- Posts: 1
- Joined: Tue May 13, 2025 5:45 am
- Your Location: Tanzania
- Contact:
What to do if you spot debris
Often, when spaceborne garbage hurtles back toward Earth, objects such as defunct rocket parts are torn apart by the jarring physics as they can slam into Earth’s thick inner atmosphere while still traveling at more than 17,000 miles per hour (27,000 kilometers per hour).
kra33cc
Each of the pieces from the rocket part can then pose a threat to the area where it lands.
But Cosmos 482 was well suited to make the trip home in one piece. The spacecraft had a substantial heat shield that protected the vehicle from the intense temperatures and pressures that can build up during reentry.
https://kra32g.cc
kraken вход
And because Cosmos 482 was designed to reach the surface of Venus — where the atmosphere is 90 times denser than Earth’s — the probe likely remained intact.
The Soviet Venera program
The Soviet Union’s Space Research Institute, or IKI, ran a groundbreaking Venus exploration program amid the 20th century space race.
Venera, as the program was called, sent a series of probes toward Venus in the 1970s and ’80s, with several spacecraft surviving the trip and beaming data back to Earth before ceasing operations.
Of the two Venera vehicles that were launched in 1972 , however, only one made it to Venus.
The other, a spacecraft sometimes cataloged as V-71 No. 671, did not. And that’s why researchers believed that Cosmos 482 was the failed Venera vehicle. (Beginning in the 1960s, Soviet vehicles left in Earth orbit were each given the Cosmos name and a numerical designation for tracking purposes, according to NASA.)
kra33cc
Each of the pieces from the rocket part can then pose a threat to the area where it lands.
But Cosmos 482 was well suited to make the trip home in one piece. The spacecraft had a substantial heat shield that protected the vehicle from the intense temperatures and pressures that can build up during reentry.
https://kra32g.cc
kraken вход
And because Cosmos 482 was designed to reach the surface of Venus — where the atmosphere is 90 times denser than Earth’s — the probe likely remained intact.
The Soviet Venera program
The Soviet Union’s Space Research Institute, or IKI, ran a groundbreaking Venus exploration program amid the 20th century space race.
Venera, as the program was called, sent a series of probes toward Venus in the 1970s and ’80s, with several spacecraft surviving the trip and beaming data back to Earth before ceasing operations.
Of the two Venera vehicles that were launched in 1972 , however, only one made it to Venus.
The other, a spacecraft sometimes cataloged as V-71 No. 671, did not. And that’s why researchers believed that Cosmos 482 was the failed Venera vehicle. (Beginning in the 1960s, Soviet vehicles left in Earth orbit were each given the Cosmos name and a numerical designation for tracking purposes, according to NASA.)
Who is online
Users browsing this forum: No registered users and 4 guests