Snap On Obsolete Air Tool Parts, Repair or General Help

[ibidtobuy]

I have an eBay business where I cater to Snap On air tool users who have been cast aside by the Snap On Service Centers when their tools were considered obsolete. I specialize in parts and repairs for air tools like: IM31, IM32, IM51, IM75, IM510, IM1800, IM3100, IM5100, IM6100, IM6500HP, MG31, MG725, MG1200/MG1250, PT850 and XT7100. For some tools I may be the most qualified person to help you: repair, locate parts or upgrade your older tool. For example I take the IM5100 and IM6100 performing at about 500 foot pounds of reverse torque and make them operate with the torque output of a PT850 or MG725 that is closer to 750 foot pounds. This is done with my tune up kits and conversion kits to increase the tool torque output by upping the rpms of the rotor. You can email me with questions to: marchasara@netzero.com and on eBay look for my store under the username of "ibidtobuy". My ebay store is: SNAP-ON OBSOLETE RESTOMOD AIR TOOLS
My Sparks, Nevada based business model is intended to help to provide the DIY guy, professional tool repair guy and shop mechanic with what they need to empower them to keep control of their tools under their supervision while they make their own repairs. I am a 68 year old guy with arthritic hands who is mostly interested in helping you source your tool repair parts. As this is a site for Snap On parts primarily I mention that I also help Blue Point tool users with some things that they need. I am self taught. I also deal with Ingersoll Rand, CP, some Matco and some Mac products as there is some crossover to Blue Point and Snap On products. I currently have the only Snap On PT338/PT350 tune up kits available right now for direct purchase. Snap On is not allowing the PT338 parts out of their control possibly due to the impact I have personally had on their Service Center business with PT850, MG325 and MG725 tools.

[snapmom]

A head for a BP air ratchet i think. never used