9/32" Socket wanted

Members can post items they're looking for here. The owner of this board assumes no responsibility for the actions of people who want to buy or sell things. Please use caution as you would on CraigsList.
Forum rules
The owner of this board assumes no responsibility for the actions of people wishing to buy or sell items, it is merely for provided as an informational service. Use caution as you would with CraigsList.

Please make sure you've read the Rules and Etiquette Page, which spells out the rules and guidelines of this forum.
Post Reply
lucakiki
Posts: 13
Joined: Thu Apr 26, 2012 7:42 am
Your Location: TORINO ITALY
Contact:
Contact lucakiki

9/32" Socket wanted

Post by lucakiki »

I would like to purchase an M410 socket to complete my Midget set.
No need to ship abroad because I have an adress in Utah.

Let me know if you can help. Thank you.

I would possibly prefer to pay with paypal, but if needed I can arrange otherwise.
Top
snapmom
Posts: 1102
Joined: Sun Oct 17, 2010 2:38 pm
Contact:
Contact snapmom

Re: 9/32" Socket wanted

Post by snapmom »

What era?
Top
lucakiki
Posts: 13
Joined: Thu Apr 26, 2012 7:42 am
Your Location: TORINO ITALY
Contact:
Contact lucakiki

Re: 9/32" Socket wanted

Post by lucakiki »

war time,possibly.
Top
snapmom
Posts: 1102
Joined: Sun Oct 17, 2010 2:38 pm
Contact:
Contact snapmom

Re: 9/32" Socket wanted

Post by snapmom »

I have a 1941, but it does not have the war time finish.
Top
lucakiki
Posts: 13
Joined: Thu Apr 26, 2012 7:42 am
Your Location: TORINO ITALY
Contact:
Contact lucakiki

Re: 9/32" M410 Socket wanted

Post by lucakiki »

Maybe I should not be that picky,since my toolset is far from perfect.

Image

Year codes are mostly E,with some G.

Please disregard the ratchet: it is only a temporary filler,but I have the proper one arriving soon.
Yes, I could do with a better M-8,since somebody has shortened it a bit: one day I will upgrade that one too.
Top
GTM
Posts: 13
Joined: Wed Apr 04, 2012 7:59 pm
Your Location: Somewhere in the USA
Contact:
Contact GTM

Re: 9/32" Socket wanted

Post by GTM »

I was going through some old stuff on eBay and found a 1935 M410 for sale for a whopping $8.50 plus $2.00 shipping.

http://www.ebay.com/itm/Vintage-Snap-On ... 19d0782d76

Hope it is what you need and you are willing to pay the price.
Top
GTM
Posts: 13
Joined: Wed Apr 04, 2012 7:59 pm
Your Location: Somewhere in the USA
Contact:
Contact GTM

Re: 9/32" Socket wanted

Post by GTM »

Here's another one but the socket in the picture says 412. You'll have to contact the seller.

http://www.ebay.com/itm/Vintage-Snap-On ... 1e6d949a65
Top
lucakiki
Posts: 13
Joined: Thu Apr 26, 2012 7:42 am
Your Location: TORINO ITALY
Contact:
Contact lucakiki

Re: 9/32" Socket wanted

Post by lucakiki »

GTM wrote:Here's another one but the socket in the picture says 412. You'll have to contact the seller.

http://www.ebay.com/itm/Vintage-Snap-On ... 1e6d949a65
It is advertised as 1/4",so not what I need,but thank you nevertheless.
I think the one Snapmom has might fit the bill.

Snapmom, can you send me a message?
Top
lucakiki
Posts: 13
Joined: Thu Apr 26, 2012 7:42 am
Your Location: TORINO ITALY
Contact:
Contact lucakiki

Re: 9/32" M410 Socket wanted

Post by lucakiki »

While Snapmom kindly sold me a close enough socket, I would be happy to upgrade whenever possible to an M410 socket marked with E or G code.
Top
lucakiki
Posts: 13
Joined: Thu Apr 26, 2012 7:42 am
Your Location: TORINO ITALY
Contact:
Contact lucakiki

Re: 9/32" Socket wanted

Post by lucakiki »

They arrived safely: thank you Snapmom!
Top
Post Reply

Return to “Tools Wanted”

Who is online

Users browsing this forum: No registered users and 2 guests