Early two pinched brace.

This is the place to ask questions about specific tools. Please search for other questions about your subject before you post a new one... it may already be here. Also, please include pictures if possible to make identification easier.
Forum rules
Please make sure you've read the Rules and Etiquette Page, which spells out the rules and guidelines of this forum.
Post Reply
snapmom
Posts: 1127
Joined: Sun Oct 17, 2010 2:38 pm
Contact:

Early two pinched brace.

Post by snapmom »

Image
Image
Image
1stDuke
Posts: 8
Joined: Tue Jan 10, 2012 4:00 pm
Your Location: Harrisburg, PA
Contact:

Re: Early two pinched brace.

Post by 1stDuke »

What year do you think this was manufactured? Was it before the four pinched brace? The 1925 catalog notes that the brace had ball stops, so the pinched stops must have been prior to 1925.
snapmom
Posts: 1127
Joined: Sun Oct 17, 2010 2:38 pm
Contact:

Re: Early two pinched brace.

Post by snapmom »

Its 20-21. Before four pinched. Four pinched were 21-22. Three ball starts in 22
1stDuke
Posts: 8
Joined: Tue Jan 10, 2012 4:00 pm
Your Location: Harrisburg, PA
Contact:

Re: Early two pinched brace.

Post by 1stDuke »

Here is a two pinched S-5 Sliding Tee with a 1/2 inch diameter bar. Are these rare since the early production S-5s had a 9/16 inch diameter bar?
S-5 Sliding Tee 1/2" diameter bar
S-5 Sliding Tee 1/2" diameter bar
S-5 Sliding Tee half inch bar.JPG (130.9 KiB) Viewed 1209 times
S-5 Sliding Tee 2 pinch
S-5 Sliding Tee 2 pinch
S-5 Sliding Tee 2 pinch.JPG (91.71 KiB) Viewed 1209 times
snapmom
Posts: 1127
Joined: Sun Oct 17, 2010 2:38 pm
Contact:

Re: Early two pinched brace.

Post by snapmom »

A nice tee, the ones with the pinched ends are hard to find. there is a 9/32 and a 5/8 with pinched ends too.
Post Reply

Who is online

Users browsing this forum: No registered users and 78 guests